1. Home
  3. 13Amp 6V-30V DC Motor Driver (SMD Compatible)

13Amp 6V-30V DC Motor Driver (SMD Compatible)

$26.50 AUD
$26.50 AUD
Tax included.
Brand: Cytron
Quantity In Stock: 29 Units in Stock
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
6V-30V Dc Motor Driver
$26.50 AUD
$26.50 AUD

Brushed motor is the most widely used motor because of the ease of operation. Just supply the two terminals DC power supply, the motor will start rotating! Yet, you need a good motor driver to control the speed and direction from microcontroller. You are at the right page, MD13S is one of the easiest to use brushed motor driver.

MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to limit and support current up to 30A max(10 seconds). And the continuous current is at 13A without heatsink (at room temperature of 25°C).

Not to forget it is GROVE compatible, so get yourself a Grove shield. Oh, did I mention? MD13S is smaller than MD10C :)

Which brush motor is good to be driven by MD13S? As long as the motor:

  • Is DC Brush motor (Two Terminals)
  • Operating voltage from 6V to 30V
  • Rated Current ≤ 13A
  • Peak Current ≤ 30A
    Features
    • Bi-directional control for 1 brushed DC motor
    • Support motor voltage from  6V to 30VDC
    • Maximum current up to 13A continuous and 30A peak (10 seconds)
    • GROVE compatible
    • 3.3V and 5V logic level input.
    • Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
    • Fully NMOS H-Bridge for better efficiency and no heat sink is required
    • Regenerative Braking
    • Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)
    • Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWM
    • SMD compatible
    • RoHS, FCC and CE compliance
    • Dimension: 61mm x 33mm

    Specifications
    Operating Condition
    Compatible input 3.3 and 5V
    Motor Channel 1
    Operating Voltage (VDC) 6 to 30
    Peak Current (A) 30 (10 seconds)
    Continuous Current (A) 13
    Operating Modes
    Arduino Shield No- can be used with Wire connection
    PWM (Lock-Antiphase and Sign-Magnitude) Yes
    UART No
    Analog No
    RC Servo Signal No
    Special Protection
    Polarity Protection NO
    Appearance
    LEDs Indicator Yes
    Test/Manual Button Yes
    Cooling Fan No
    Other Features
    Extra Socket Grove Compatible
    others No heat sink is required
    Packing List
    • 1 x MD13S motor driver board
    • 1 x Green + Black 2-way terminal blocks (Normally Black is for Motor, Green is for Power)
    • 1 x Grove connector (Grove to Grove)

     

    Resources